3D printers rally to make PPE, simulation examines social distancing

Professional and hobbyist 3D printers join the race to make PPE, simulation reveals social distancing's effectiveness

Professional and hobbyist 3D printers join the race to make PPE, simulation reveals social distancing's effectiveness

3D printers rally to produce PPE, simulation examines social distancing (images courtesy of Dassault Systemes, Ansys, Stratasys)

3D printers rally to make PPE

As supply chains come to a grinding halt, and hospitals are facing shortage of personal protective equipment (PPE), 3D printer owners, from professional service providers to individual hobbyists, rally to fill the void.

3D printer maker Stratasys launched a campaign to organize its partners to produce face shields. Face shields protect doctors and nurses from droplets when treating patients with COVID-19. They usually include two parts: the frame to mount it on the head, and the clear plastic sheet.

If you have the right STL file, you can print the frames, then mount a store-bought or laser-cut plastic sheet to create a homemade face shield.

The Columbus, Ohio-based CAMS (Columbus Advanced Manufacturing Systems) is also making face shields and donating them to healthcare workers.

Techie and YouTuber Joel Telling was asked by a friend, who is an emergency room nurse, to make some face shields because her hospital is running low on them. Joel uses an open-source-design printer from Prusa Research and another from Raise3D. He can churn out about 15 visor frames a day, and he has donated a few hundred to local hospitals so far.

Other 3D printer makers, like 3D Systems, and industry groups like America Makes also have similar projects in place. If you have a printer and want to help, check out the links below.

COVID-19 Response Pages

3D Systems: http://www.3dsystems.com/covid-19-response

Carbon 3D: http://www.carbon3d.com/covid19

Fictiv: www.fictiv.com/covid-19-face-shields

Stratasys: https://www.stratasys.com/covid-19

Syracuse University: www.syracuse.edu/stories/3d-print-response-covid-19/

MIT E-Vent: http://e-vent.mit.edu

Massivit3D: www.massivit3d.com

HP: http://enable.hp.com/us-en-3dprint-COVID-19-containment-applications

Service providers begin taking PPE order

Tech firms capable of producing PPE are now accepting direct orders from hospitals. This includes Fictiv, an on-demand manufacturing service provider, and Carbon, a 3D printer developer.

3D printer maker Carbon is partnering with Adidas to print face shield frames, using its digital light synthesis technology. The company uses the same material used in the 4D-printed footwear cocreated by Carbon and Adidas. Carbon is now producing 18,000 PPE face shields per week, according to the company.

Carbon plans to make the printable 3D file open-source so anybody with a compatible printer can print it.

Carbon is also producing testing swabs to increase the volume of tests possible to identify people with Coronavirus. The company says it can scale up to a million swabs per week.

Simulating social distancing

Some simulation software vendors have been using their technology to better understand what happens when you sneeze, or if you fail to maintain the recommended social distancing protocols.

Dassault Systemes published a sneeze simulation, done with SIMULIA PowerFLOW.  The simulations are based on 1st principle physics and the animation demonstrates how sneezing transports droplets from one individual to another; and how the shield provides a certain level of protection during the event.

ANSYS has also created a number of video clips, showing how a face mask with proper nose clip prevents harmful droplets or particles from coming in contact with the user.

In another clip, the simulation compares side-by-side jogging to following behind another jogger. The research is done by Professor Bert Blocken and Fabio Malizia at TUe (Eindhoven University of Technology) & KU Leuven University. Previously they use similar methods to analyze the effects of different riding positions in a peloton.

More 3D Systems Coverage

More America Makes Coverage

Sponsored Content
Additive Manufacturing/3DP Information Alignment
Growing the number of additive manufacturing information assets within the America Makes digital storefront.
America Makes Reschedules October MMX Meeting to December
The previously scheduled in-person event has switched to virtual.
America Makes TRX to Meet at OSU
Deadline for event slated for early August is July 27.
America Makes Unveils Student-Oriented Additive Manufacturing Training Network
Program builds talent pipeline to prepare Ohio students for 3D printing careers.
America Makes Announces Open Project Call Totaling $1.6M in Funding
Project call focuses on five technical topics to boost development and deployment of innovative, energy-efficient AM technologies.
America Makes Wraps Up Successful Scenario Testing for Crisis Response Program
Successful tests showcase additive manufacturing as a critical component of U.S. supply chain resiliency.
America Makes Company Profile

More Carbon Coverage

More Dassault Systèmes Coverage

Dassault Systèmes Company Profile

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.

About the Author

Kenneth Wong's avatar
Kenneth Wong

Kenneth Wong is Digital Engineering’s resident blogger and senior editor. Email him at [email protected] or share your thoughts on this article at digitaleng.news/facebook.

      Follow DE