A Price/Performance Champ: Velocity Micro ProMagix HD60

This new workstation from Velocity Micro delivers top performance.

This new workstation from Velocity Micro delivers top performance.

Fig. 1: The new Velocity Micro ProMagix HD60 is an extremely powerful workstation housed in a monolithic ATX tower case. Images and charts courtesy of David Cohn.

We recently received the latest iteration of the Velocity Micro ProMagix HD60 tower workstation, the third system from the Richmond, VA-based system integrator that we have reviewed in the past four years.

Though the last workstation we received from Velocity Micro was based on an AMD processor (DE April 2022), the new ProMagix HD60 included the latest 12th-gen Intel Core i9 CPU.

The new Velocity Micro ProMagix HD60 workstation came housed in a large charcoal gray tower case measuring 9.0x21.0x20.0-in. (WxDxH) and weighing 26.25 lbs. The monolithic front provides no external drive bays.

A small rectangular power button, a pair of USB 3.2 Gen 1 ports, plus microphone and headphone jacks are located on top of the case, set several inches back from the front edge. A pair of cooling fans are also visible below vents on the top of the case, and the fans and the Velocity Micro logo near the bottom of the front panel glow blue when the system is powered up.

Like the ProMagix HD60 we reviewed in April, the system ran quiet, averaging just 41dB at rest and barely climbing above that, even under heavy compute loads.

The rear of the case provides six additional USB 3.2 Gen 2 Type-A ports and two USB 3.2 Gen 2 Type-C/Thunderbolt 4.0 ports with up to 5V/3A 15-watt charging support, as well as a pair of RJ-45 ports (one Marvell AQtion 10Gb and one Intel 2.5Gb) for the integrated 10/100/1000MBps gigabit ethernet network adapter.

There are also antenna connectors for the built-in Wi-Fi and five audio jacks (microphone, line-out/front speaker, line-in/side speaker, rear speaker and center/sub-woofer).

Fig. 2: Removing the thin side panel gives access to the roomy interior.

The thin left-side panel with a large window etched with the Velocity Micro name and logo is held in place with 10 snap connectors. Once removed, you have complete access to the well-organized interior with two internal drive bays, which were unfilled.

Many Options

As was true last year, Velocity Micro sells four versions of the ProMagix HD60: mid-towers or full towers with AMD or Intel CPUs. The system we received was a full-tower ATX case with an Intel CPU, but some components in the precise configuration we received were not yet available on the Velocity Micro website at the time of our review.

We had to rely on pricing provided by the company. According to Velocity Micro, our evaluation unit had a base price of $2,069 and a price as tested of $4,999 ($5,428 after adding a mouse and keyboard and extending the warranty to 3 years).

Fig. 3: The rear panel of the Velocity Micro ProMagix HD60 provides ample connections.

The extended ATX aluminum chassis was similar to one manufactured by Lian Li that housed the ProMagix HD60 system we reviewed in April 2020, with a power supply mounted at the bottom rear. That case is a $160 upgrade over the standard PX case. The base configuration also includes a 750-watt power supply and an Asus PRIME Z590-A motherboard, while the system we received included an 850-watt EVGA SuperNOVA 80Plus Gold Certified power supply and an Asus ProArt Z690-CREATOR Wi-Fi motherboard, which added an additional $110 and $100, respectively. Power supplies of up to 1,600 watts are also available. Though the base configuration includes an Arctic Freezer 34 cooling system, our evaluation unit came with a Velocity Micro LiquiCool 8 closed-loop liquid cooling system with a 360-mm intercooler and three 120-mm cooling fans, a $240 add-on. IC Diamond thermal paste between the CPU and heat sink added $25.

The upgraded Asus ProArt Z690 motherboard, based on an Intel Z690 chipset, provides four dual-inline memory module sockets supporting a maximum of 128GB of non-error-correcting code (ECC) unbuffered memory.

Fig. 4: Price/Performance chart based on SPEC workstation benchmark product development workloads. Click here for full-size chart.

According to Velocity Micro, the 32GB of DDR5-5200MHz RAM—installed as a pair of 16GB modules—is included in the base configuration for this new system. The motherboard provides an LGA1700 socket that supports Intel 12th-gen Intel Core, Pentium Gold and Celeron processors.

Though the base price includes an Intel Core i5-12600K CPU, our evaluation unit came with an Intel Core i9-12900K Alder Lake processor, which increased the price by $440. That 16-core CPU provides eight performance-cores (P-cores) with a base frequency of 3.2GHz and eight efficient-cores (E-cores) with a 2.4HGz base frequency, for a total of 24 threads.

Tower workstations compared. Numbers in blue indicate best recorded results. Numbers in red indicate worst recorded results. Click here for full-size PDF. Image courtesy of David Cohn.

Performance cores are larger, high-performance cores designed for raw speed while efficient cores are smaller, with multiple E-cores fitting into the physical space occupied by one P-core. The performance cores have a maximum turbo boost of 5.1GHz and 5.2GHz using Intel Turbo Boost Max Technology 3.0. Based on the latest Intel 7 lithography, the CPU has a 30MB Intel Smart Cache, a processor base power of 125 watts and a maximum turbo power of 241 watts.

The motherboard also includes Wi-Fi and Bluetooth, and a Realtek S1220A 7.1 surround-sound high-definition audio CODEC. There are also three PCIeX16 expansion slots. The base configuration comes with an NVIDIA Quadro T400 graphics card, but our system included an NVIDIA RTX A4000 graphics processing unit (GPU), which added $1,485. This virtual reality-ready GPU, based on NVIDIA’s GA104 graphics processor, comes with 16GB of GDDR6 ECC memory and features 6144 compute unified device architecture (CUDA) cores, 192 Tensor cores and 48 RT (raytracing) cores. Its 256-bit interface yields a bandwidth of 448GB/second while consuming 140 watts. Although it is a single-slot card, it does require additional power via a six-pin auxiliary connection. The RTX A4000 provides four DisplayPorts.

The Asus ProArt motherboard also supports four M.2 slots and eight SATA 6Gbs ports. The base ProMagix HD60 configuration includes a 250GB Crucial P2 NVMe M.2 solid-state drive. Our evaluation unit came with a 2TB Samsung 980 Pro PCIe 4.0 NVMe M.2 drive with up to 7000MBps read and 5000MBPs write capability, adding $350 to the base price.

Fig. 5: Graphic performance of recent mobile workstations, based on the SPECviewperf 13 geomean results. Click here for full-size chart.

Excellent Performance

We have come to expect excellent performance from Velocity Micro workstations and anticipated nothing less from this well-appointed system. Indeed, this new ProMagix HD60 workstation delivered some of the best scores ever on a number of our benchmarks.

But since this new system from Velocity Micro came with the new Windows 11 Home operating system preinstalled, we encountered a few problems. On the SPECviewperf benchmark, which focuses on graphic performance (and is officially supported under Windows 11), the ProMagix HD60 garnered top scores on several datasets and was near the top in the others.

Although the system was unable to complete some of the tests in the demanding SPEC workstation performance benchmark (which is not yet officially supported under Windows 11), it turned in top scores in three of the six focused workloads, including Product Development, on which we base our price/performance calculations. On our own AutoCAD rendering test, the 19.4-second average time lagged just half a second behind the fastest system we ever tested.

Though Windows 11 Home is included in the base price, you can opt for Windows 11 Pro for $90 more or choose Windows 10 Pro for an additional $70. Or you can save $80 by ordering the system without an OS and install your own. Velocity Micro does not include a mouse or keyboard unless you add one to your order. We included a basic Microsoft USB keyboard ($15) and optical mouse ($15) in our as-tested price.

The standard Velocity Micro warranty only covers the system for 1 year. Since many original equipment manufacturers (OEMs) back their workstations for 3 years, our as-tested price includes a $399 charge to extend coverage to 3 years for parts, labor and depot repair service. Velocity Micro also includes a lifetime upgrade plan that allows you to return the system for maintenance, upgrades and testing.

As configured, our system priced out at $5,428, making it a clear price/performance winner. Although equipped with certified hardware, the system itself lacks independent software vendor certification. If that certification is not an issue for you, Velocity Micro has again proven that it knows how to assemble high-end workstations. Quite simply, this new Velocity Micro HD60 workstation is another winner.

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.

About the Author

David Cohn's avatar
David Cohn

David Cohn is a consultant and technical writer based in Bellingham, WA, and has been benchmarking PCs since 1984. He is a Contributing Editor to Digital Engineering, the former senior content manager at 4D Technologies, and the author of more than a dozen books. Email at [email protected] or visit his website at www.dscohn.com.

Follow DE