CoreTechnologie Integrates 3D Master Technology into its Tools

Native CAD models including dimensions and tolerances can be converted and also displayed with all specific functions of the model based definition technology.

Native CAD models including dimensions and tolerances can be converted and also displayed with all specific functions of the model based definition technology.

Image courtesy of CoreTechnologie.

Software manufacturer CoreTechnologie has fully integrated the advanced 3D master technology in its tools. The 3D master technology for a paperless production based on 3D CAD models is supported also by new standard formats like STEP AP 242 and JT.

The German-French software manufacturer CoreTechnologie has integrated the advanced 3D master technology in its tools. Native CAD models including dimensions and tolerances can be converted and also displayed with all specific functions of the model based definition technology. The use of 3D master is reducing the need for 2D drawings to a minimum, because in the 3D model all production-relevant information is saved in so called views or captures.

Simplification of the Digital Manufacturing Process

The 3D_Evolution software converts data from all CAD systems including 3D master relevant formats such as Catia V5, NX, Creo as well as STEP AP 242 and JT. The viewer software 3D_Analyzer developed by CoreTechnologie reads all current CAD data and also supports all 3D master specific functions.

To display all the information contained in the 2D drawing on a 3D model requires a special technology that combines tolerances, annotations and dimensions in the views. By selecting a view, the model is aligned as previously defined by the designer and zoomed into a particular area. So only the dimensions chosen by the designer are shown.

In addition, sections can be saved in the views. As a result, 3D master models eliminate the need for 2D drawings to produce the part. Also, 3D master models are easier to use and allow for a better comprehension compared to specific views created and printed out as 2D drawings. In addition, using 3D master there is only one data source needed to produce the parts which virtually eliminates errors and confusion often caused by different revisions of ambiguous 2D drawings.

Complete and Flexible Use

The 3D_Evolution CAD converter suite transfers the graphical representation of the dimensions as well as the semantic, i.e. textual data of the Product Manufacturing Information (PMI) as well as the reference to the surfaces to the 3D model. A special analysis function available in the converter and the viewer allows the comparison of the PMI, so that even large models with hundreds of 3D dimensions are automatically compared within seconds and differences are clearly visible and documented.

This comprehensive software solution from CoreTechnologie meets all the requirements for a consistent 3D master process. The cost-effective viewer can be installed on a Windows tablet for use in the workshop and can be used flexibly in company networks or on the go thanks to floating and license borrowing functions.

Sources: Press materials received from the company.


For More Info

CoreTechnologie

Share This Article

About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering. Press releases can be sent to them via [email protected].

Follow DE
#21856