Marshall Aerospace and Defence Works with Stratasys Technology to 3D Print Final Flight Parts for Aircraft Program

The company also builds ground-running equipment on the Stratasys Fortus 450mc 3D printer in tough Nylon 12 material at lower cost than aluminum production.

The company also builds ground-running equipment on the Stratasys Fortus 450mc 3D printer in tough Nylon 12 material at lower cost than aluminum production.

Final, flight-approved, 3D printed ducting for air conditioners. 3D printed in ULTEM 9085 resin on the Fortus 450mc. Image courtesy of Stratasys/Business Wire.

Marshall Aerospace and Defence is using advanced 3D printing from Stratasys to manufacture, flight-ready parts for several of its military, civil and business aircraft, while producing specific ground-running equipment at a lower cost than aluminum alternatives, the company reports. The company is a large privately owned and independent aerospace and defense companies.

Marshall already has several pieces of 3D-printed ductwork flying on heavily modified aircraft, as well as holders for safety knives and switches for aircraft interiors. 3D printing flight-approved parts on demand enables the company to produce lighter parts than traditional methods.

According to Chris Botting, Materials, Processes and Additive Manufacturing Engineer at Marshall ADG, the ability to create accurate, repeatable and reliable 3D printed parts using aerospace-approved materials are key factors in achieving the performance requirements necessary for use within aircraft.

“When manufacturing on complex engineering programs, we need a method that can create an accurate, complex, functional and lightweight duct efficiently with minimal tooling costs – this is where 3D printing fits perfectly,” says Chris Botting, Materials, Processes and Additive Manufacturing Engineer at Marshall ADG. “But we also need to ensure that the ducting work produced will be approved by the EASA for flight.”

“As a result, we’re using the Stratasys Fortus 450mc FDM Printer and ULTEM™ 9085 resin—a tough, yet lightweight 3D printing material with high thermal and chemical resistance,” Botting says. “This has been crucial to overcoming the stringent requirements of our industry, as we can now 3D print parts with the desired flame, smoke and toxicity properties for use on aircraft interiors.”

The company is also using its Fortus 450mc 3D printer, purchased from Stratasys UK and Ireland Platinum Partner SYS Systems, to build final parts on the ground. Marshall recently created a ducting adapter prototype for vital ground-running equipment for providing fresh air to cool the aircraft’s avionics. 

“Before committing to expensive aluminum machining, we used the Fortus 450mc to 3D print a prototype in ASA material,” says Botting. “It enabled us to create an accurate working prototype of a complex component. We were then able to demonstrate it had the potential to be 3D printed in Nylon 12 material as opposed to the more conventional method of machining from aluminum.

“The 3D printed duct led to a significant cost reduction compared to machining the part out of aluminum, as well as a 63% reduction in overall weight,” he adds.

The group is also using Stratasys 3D printers for a range of complex tooling applications, including drill jigs, masking templates, bonded fixtures and composite mold tooling. Botting foresees the use of Stratasys FDM additive manufacturing to increase across all elements of the business and to drive new applications.

“FDM technology has altered the way we work, and the aerospace-grade 3D printers and materials enable us to meet our increasingly aggressive deadlines and complex manufacturing requirements,” Botting says. “In the future, there is no doubt that 3D printing will continue to have a significant impact in the way we design and manufacture in our business.”

To learn more about Stratasys’ additive manufacturing solutions for the aerospace industry, visit Hall 4, Stand D192 at the International Paris Air Show, 2019, June 17–23, Paris, France.

Sources: Press materials received from the company and additional information gleaned from the company’s website.

More Stratasys Coverage

Sponsored Content
Rapid Prototyping in The Automotive Industry
Henry Ford may not have invented the automobile, but his pioneering spirit did transform the way cars were made. His assembly line process drastically reduced costs with standardized parts and greater efficiency which led to lower cost, higher quality and...
Stratasys Plans Strategic Investment in Xaar 3D
Stratasys to increase ownership in Xaar 3D from 15% to 45% with option to fully acquire.
SME, Stratasys Announce Winners of FANUC-Inspired SkillsUSA Additive Manufacturing Competition
Six teams—three high school and three college teams—received top honors for the designs they created during the three-day contest.
Racing Group Sprints Ahead with Stratasys 3D Printing
See how Stratasys helps Don Schumacher Racing eliminate the time-consuming, trial-and-error process involved with machining out new components.
Edwards Air Force Base 3D Prints Aircraft Parts
The base is using an industrial plastic printer to produce and fit parts to save time, costs
PENSA’s Path to Prolific Prototypes Starts With the MakerBot METHOD
The industrial-grade desktop 3D printer is used by the design and engineering shop to test new ideas early and often and helps accelerate the design cycle.
Stratasys Company Profile

Share This Article


About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering. Press releases can be sent to them via [email protected].

Follow DE
#22765