Nebraska Researcher Prints Dissolvable Surgical Implants

Implants that break down in the body could reduce pain, additional surgeries.

Implants that break down in the body could reduce pain, additional surgeries.

Assistant Professor Michael Sealy displays a dissolvable implant printed using a new process developed at the University of Nebraska-Lincoln. Image courtesy of University of Nebraska-Lincoln.


Engineers at the University of Nebraska-Lincoln’s College of Engineering have created a process to print dissolvable surgical implants using a 3D hybrid printer.

“This approach is essentially a way to print your own mechanical properties. It’s something that traditional manufacturing has never really had the ability to do before.”

— Michael Sealy, University of Nebraska-Lincon

The controlled atmosphere system can print dissolvable magnesium implants that researchers say could reduce the cost, risk and pain associated with implants like surgical screws and pins.

Team leader Michael Sealy, an assistant professor of mechanical and materials engineering, presented the research at the International Manufacturing Technology show in Chicago in September.

Sealy and his team worked on the project at the Nebraska Engineering Additive Technology (NEAT) Labs using an Optomec Laser Engineered Net Shaping 3D metal hybrid machine tool. The printer provides an atmosphere-controlled environment for printing reactive metals.

Most current medical implants are made of stainless steel or titanium, which remain in the body indefinitely or have to be surgically removed.

Michale Sealy, University of Nebraska-Lincoln, with Optomec 3D printer.

Michael Sealy, an assistant professor of mechanical and materials engineering, with the Optomec 3D Hybrid Machine Tool. Image courtesy of the University of Nebraska.

“Our research is focused on advancing the performance and functionality of dissolvable devices,” said Sealy, assistant professor of mechanical and materials engineering. “Using LENS, we are applying a hybrid additive manufacturing process to control the disintegration of medical fasteners and plates so they stay intact long enough to serve their purpose and then degrade away once the bone is healed.”

According to Sealy, he was partly inspired to develop the process because of the screws in his own elbow, remnants of an injury he sustained in the fifth grade that still cause him occasional pain.

“Instead of having these permanent metal implants, let’s have one that degrades over time,” Sealy said. “Let’s eliminate this whole idea of a second surgery to have these implants removed.”

The 3D print process allows for control of the magnesium’s degradation process in the body via laser peening.

“Instead of [laser] peening as a surface treatment, where I just hammer my outer surface, I’m going to print so many layers, and then hammer it, and then print a few more layers, and then hammer that,” Sealy said. “Then I can control corrosion all the way through these devices. This approach is essentially a way to print your own mechanical properties. It’s something that traditional manufacturing has never really had the ability to do before.”

Potentially, implants that degrade at different rates could be developed.

Source: University of Nebraska-Lincoln

More Optomec Coverage

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

Brian Albright's avatar
Brian Albright

Brian Albright is the editorial director of Digital Engineering. Contact him at [email protected].

Follow DE
#21850