Sharebot SnowWhite 2 Printer Now Available

SLS system targeted at economical polymer part production.

SLS system targeted at economical polymer part production.

The new SnowWhite 2 3D printer. Image courtesy of Sharebot.


Sharebot has released its new SnowWhite 2 3D printer, an SLS system with improved temperature control and a new software engine. 

The printer's 14W Co2 laser has a spot diameter of 0.2mm, and the printer is compatible with a variety of polymer powders, as well as specially loaded powders with glass, carbon, aluminum and other additives. 

According to the company, the printer can be set up in just ten minutes. Users can print with one click with as little as 300g of material, and all unused powder can be recycled. The printer can also integrate with an external inert gas distribution module.

The SnowWhite 2 has a print volume of 100 x 100 x 100mm and a scan speed of 3500mm/s. 

According to the company:

“SnowWhite was created to bring the advantages of sintering to small and medium-sized companies and laboratories, all in an economic, simple and effective way without sacrificing the professional quality of the result. The user can really “print in one click” because, once the profile of the material has been defined, the printing process is completely autonomous, requires no external intervention and the results are perfectly repeatable.”

Sources: Press materials received from the company and additional information gleaned from the company’s website.

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.




About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].

Follow DE
#24216