Spectrum Launches Digitizers with Long Signal Averaging Capabilities

Process uses combination of digitizer and CUDA graphics card.

Process uses combination of digitizer and CUDA graphics card.

Spectrum Instrumentation signal averaging package. Image courtesy of Spectrum Instrumentation.


A new signal averaging package from Spectrum Instrumentation impacts the way that signals can be acquired and averaged. Signal averaging plays a role in applications where signal details, hidden in random noise, need to be extracted and analyzed. The new package uses SCAPP (Spectrum's CUDA Access for Parallel Processing) together with the company's latest digitizer products to harness the power of any CUDA-based GPU card, the company reports SCAPP gives users the ability to port data directly to the GPU, using RDMA (Remote Direct Memory Access) transfers, where high-speed time and frequency domain signal averaging can be performed without the length limitations. The averaging package will be of interest to those working with signals that are low level or where signal details are lost due to high amounts of noise. This includes applications such as mass spectrometry, LIDAR, radio astronomy, automation, radar, biomedicine, sonar and more. The package is available for immediate delivery.

Up until now, engineers and scientists wanting to perform signal averaging had three basic choices, according to Spectrum Instrumentation. They could purchase a digital oscilloscope, which includes the averaging capability. They could buy a digitizer card and use it to send the digitized data to a PC, where host processor would perform the averaging task. Or they could purchase a specialized digitizer that performs the averaging function on-board using Field Programmable Gate Array (FPGA) technology. However, when it comes to handling the averaging process for long signals, all three of these techniques have serious limitations.

Digital scopes typically use 8-bit analog to digital converters (ADCs) which restricts an acquisition's Signal-to-Noise Ratio (SNR). Furthermore, the on-board averaging capability is often constrained by small processing systems and limited on-board memory. Fast digitizers can generally offer much higher ADC resolutions and more memory. However, porting the data to a PC usually hampers the unit's acquisition speed and can tie up the host processor while it performs the transfer and averaging functions. Finally, digitizers that employ FPGA technology need large and expensive FPGAs in order to average even moderate waveform sizes. Therefore, FPGA-based averaging packages are usually expensive and only handle limited acquisition record lengths.

In contrast, Spectrum's new approach can average long waveforms. The package works with the company's fast M4i and mid-range M2p series PCIe digitizer products. The M4i series features models that can sample signals at up to 5 GS/s with 8-bit resolution, 500 MS/s with 14-bit resolution or 250 MS/s with 16-bit resolution. The M2p cards offer sampling rates from 20 MS/s to 125 MS/s, all with 16-bit resolution and up to eight channels per card. This enables users to select a performance level that best matches their particular signal acquisition requirements. Since the data is ported directly to the GPU card by using the RDMA process, without any intervention by the host processor, averaging can be performed on signals of almost any length.

For example, an M4i.2220-x8 Spectrum digitizer can sample signals at 2.5 GS/s and average them continuously without missing an event, even when the signals being averaged are several seconds in length. Similarly, an M4i.4451-x8 digitizer with 14-bit resolution can perform the same function while sampling four signals simultaneously at 450 MS/s. The digitizer cards also include flexible trigger, acquisition and readout modes, which allows them to average signals even when the trigger rates are extremely high. In contrast to the FPGA-based solution, which needs highest performance FPGAs, the GPU-based averaging already runs at full-speed.

The Spectrum averaging package is part of the SCAPP driver package and includes the extension for RDMA that allows the direct data transfer from the Digitizer to the GPU. The package also contains a set of examples for interaction with the digitizer and a set of CUDA parallel processing examples for the basic averaging functions. Examples include time domain block, or segmented summation averaging (together with noise suppression methods as well as gap-free, frequency domain averaging). All the software is based on C/C++ and can easily be implemented and modified with normal programming skills. Starting with tested and optimized parallel processing examples gives immediate results and also permits customization for users who wish to utilize their own specific averaging algorithms. The package allows RDMA transfers directly to the GPU for PCs running LINUX, or via the CPU for systems using a Windows-based operating system.

The new Spectrum averaging package cost $390 and Spectrum digitizers start from $4,020. 

Sources: Press materials received from the company.

More Info

Spectrum Instrumentation

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].

Follow DE
#21909