Senvol Awarded Program on Delta Qualification

Senvol to demonstrate use of machine learning software to enable additive manufacturing process qualification.

Senvol to demonstrate use of machine learning software to enable additive manufacturing process qualification.

Senvol has been selected to lead a program focused on demonstrating a machine learning approach to additive manufacturing process qualification.
 
The work will be done as part of a contract that Senvol had been awarded by America Makes, the national additive manufacturing institute, and funded by the U.S. Air Force, to apply its machine learning software, Senvol ML, to enable effective additive manufacturing (AM) process qualification/re-
qualification.
 

 

Senvol’s partners on the program include Boeing, the National Institute for Aviation Research (NIAR) at Wichita State University, Battelle, ATI Inc., Element Materials Technology, 3Degrees, Pilgrim Consulting, and AoZora Additive.

As part of the program, Senvol will demonstrate a new approach to a delta qualification for AM that leverages machine learning. A machine learning approach is flexible and able to handle any change to the AM process, which makes this approach ideal for sustainment in the long term. The program will demonstrate the approach using a Ti-6Al-4V grade 5 material processed via a laser powder bed fusion AM machine.
 
“The primary objective of this program is to demonstrate a novel approach, using machine learning, to rapidly and affordably update and/or establish a qualified AM process which can allow for changes in key AM process variables—namely, the use of a new AM machine of a different make or model,” says Dr. Brandon Ribic, America Makes technology director. “By demonstrating a novel approach, we hope to accelerate and reduce the cost of establishing equivalence to the baseline material.”

 

The Senvol ML software supports the qualification of AM processes and will be used in the program to develop statistically substantiated material properties analogous to material allowables. It will do this while simultaneously optimizing data generation requirements. The software is flexible and can be applied to any AM process, any AM machine, and any AM material, according to Senvol.
 
“Senvol will implement data-driven machine learning technology that has the potential to substantially reduce the cost of process qualification and re-qualification,” says Senvol President Zach Simkin. “By demonstrating a novel approach, Senvol aims to drive tremendous value for the U.S. Air Force, the America Makes membership, and the additive manufacturing industry at large.”

“I am very pleased to join Senvol’s team for this program,” says Dr. William E. Frazier, retired chief scientist for Air Vehicle Engineer at NAVAIR / The Navy Senior Scientist for Material Engineering, and currently president of Pilgrim Consulting LLC. “Senvol’s machine learning-enabled approach directly addresses a major industry challenge: the rapid and cost-effective ability to qualify an additive manufacturing process. I have been involved with the qualification of several additive manufacturing processes and materials for flight, and in my opinion, the further development of this technology will have a positive impact on the cost, schedule, and performance of both DoD and commercial platforms.”

Users of the Senvol ML software include organizations in aerospace, defense, oil & gas, consumer products, medical, and automotive industries, as well as AM machine manufacturers and AM material suppliers.
 
The results from this America Makes program will be available to the America Makes membership as well as to the U.S. government.
 
To request a demo of the Senvol ML software, contact Senvol at [email protected] for more details.

Sources: Press materials received from the company and additional information gleaned from the company’s website.

More America Makes Coverage

Sponsored Content
Additive Manufacturing/3DP Information Alignment
Growing the number of additive manufacturing information assets within the America Makes digital storefront.
America Makes Names New Members of Executive Committee
Members understand the current and future state of the industry and provide counsel to the Institute on data management and IP policy and more.
MMX Event Highlights State of Additive and Opportunities for Growth
Leaders from industry, government, military sectors convene to collaborate and discuss what's working and challenges ahead in the AM sector.
America Makes Announces 2024 Award Honorees
The 2024 class represents a cross-section of the industry whose work helped advance additive technology and demonstrated resilience of the additive manufacturing community, America Makes says.
6K Additive Awarded Major Project for Powder and Process Optimization
6K Additive’s titanium powder selected a fit for America Makes sustainability project call.
America Makes Announces Winners of PADAM Project
The project is designed to establish data-driven methods for applying the best attributes of novel AM metal materials. 
America Makes Company Profile

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].

Follow DE
#28534