Making the Case for High-Performance Engineering Servers
September 8, 2021
The Supermicro H12 Generation A+ Server family and AMD EPYC Processors provide the performance needed for next-level engineering challenges.
Making the Case for Building an AM Team
September 7, 2018
There's no question that metal AM technology has arrived at the point where it's a viable production alternative for companies of all sizes, across many industries. Manufacturers just need to do the proper due diligence to ensure they choose the...
Making the Case: CAE Tool Consolidation
September 6, 2018
The paper backs its assertions with three, quite interesting real-world case studies; each covers gnarly problems that Simcenter 3D helped resolve.
Making the Case for CAE Tool Consolidation
September 4, 2018
Can integrating multiple simulation disciplines enhance the speed and efficiency of your product design and development process?
Making the Case for Simulation of Additive Manufacturing
September 1, 2018
The cost of running an additive manufacturing metal 3D printer, on average, is estimated to be around $100 per hour, and a single build can take upwards of 20 hours—or closer to 80 hours for highly complex parts. That's $2,000 to $8,000 wasted every...
Simulation Focus: Conference on Advancing Analysis and Simulation in Engineering (CAASE) Preview
May 8, 2018
The CAASE18 (Conference on Advancing Analysis and Simulation in Engineering) kicking off June 5-7, 2018 on the south shore of Lake Erie in Cleveland, OH plans to take the engineering analysis community by storm. The event is expected to play host...
Hexagon Debuts System-Level Modeling Solution
Using the software, teams can evaluate the performance and feasibility of new design concepts quickly to inform more efficient product...
Editor’s Picks: November 25-December 1, 2022
One of the picks will be chosen as DE’s Editor’s Pick of the Week.
Editors’ Chat: Rise of Cloud Platforms, AWS-Powered Simulation, News from Formnext, and More
DE editors discuss the news of cloud platforms from AU, AWS-Powered simulation, additive news from Formnext, and more
Boosting CAD Interoperability
Consolidation and change within industries that use engineering design software raise questions about CAD software interoperability.
Editor’s Pick: 3D printing at 25µm
Boston Micro Fabrication microArch S350 3D printer is the newest addition to...
Editor’s Pick: Bringing quality control to additive manufacturing
AM-QUALITY is a production line intelligent device to enable quality control monitoring...
Editor’s Pick: HPC simulation on any desktop
Siemens says the new addition provides instant-on, rapidly scalable cloud-based HPC for...
Editor’s Pick: Finite element analysis inside product design
PTC's cloud-native Onshape Simulation is a new finite element analysis (FEA) solver.