Helping design and engineering professionals discover, evaluate and specify technologies and processes that shorten the design cycle and enable success.
Cut Retrieval-Augmented Generation (RAG) Hallucinations by 50%
Most teams hit the same wall with enterprise AI: LLMs that hallucinate, pipelines that don’t scale, and infrastructure that’s harder to design than the models themselves.
What Is Intelligent BOM Management? A Guide to Smarter Product Development
Learn how intelligent Bill of Materials (BOM) management helps teams collaborate, reduce errors, and bring innovative products to market faster with cloud-based PLM tools.
 |
ETAS Inc. (Ann Arbor, MI; en.etasgroup.com) has released the new ES400 micro-I/O and measurement modules for placement near sensors, even if the sensors in question are located inside a vehicle's engine compartment or wheel wells.
Two ES400 modules have been released: the ES411 with 4 A/D channels and active sensor power supply, and the ES420 with 8 thermocouple channels.
With a new Ethernet cabling concept, ES400s can be daisy-chained together and connected to a PC by a single cable. In addition, a single small-diameter Ethernet PC cable can be run through a vehicle's bulkhead into the passenger compartment, eliminating the need to scrap a vehicle when testing is complete.
ES400 modules are supported by ETAS' INCA calibration and measurement software. ES400s support a standardized XCP-on-Ethernet protocol, which allows connection with third-party software such as LabVIEW and DEWESoft.
For in-depth product information and a video presentation, visit en.etasgroup.com.
DE's editors contribute news and new product announcements to Digital Engineering. Press releases may be sent to them via [email protected].
Follow DE
Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.
About Us · Contact Us · Editorial Team · Advertising · Privacy Policy · Subscriber Services · © 2026 Digital Engineering 24/7 · Peerless Media