Electroninks Makes Metal Conductive Inks
April 28, 2022
Inks cut need for traditional deposition methods and are eco-friendly.
Editor’s Pick: New polymer technology for faster industrial 3D printing
April 27, 2022
Nexa3D NXE 200 industrial 3D printer is considered an entryway into scalable additive manufacturing.
Startup Araqev Debuts Additive Software
April 26, 2022
Araqev's software helps end users print products in only a few design iterations, leading to less scrap material and machining time, the startup reports.
Massivit 10000 Tooling System Launched
April 20, 2022
The system is built to overcome recognized tooling bottlenecks in composites manufacturing.
Automotive Companies Steer Toward DfAM
April 19, 2022
Up and down the automotive supply chain, engineering organizations are turning to AM and DfAM principles to gain an edge on electrification and lightweighting design goals.
CAES Celebrates Opening of Additive Lab
April 19, 2022
Laboratory in Exeter, NH, offers 3D printed manufacturing services for aerospace and defense systems.
Computer Aided Technology and Onulis Partner
April 15, 2022
Partnership to focus on additive manufacturing efforts.
X-Bow Launches 3D Printing Process for Rocket Motors
April 15, 2022
Harnessing advances in 3D printing, automation, and digital engineering, X-Bow takes aim at modernizing the solid rocket motor manufacturing model.
Velo3D Puts Manufacturing Capabilities to Work for Aerospace Company
April 15, 2022
Velo3D’s end-to-end solution deployed in Lockheed Martin’s Additive Design & Manufacturing Center.
Additive Manufacturing Industry Grew 18% In 2021
April 11, 2022
Growth in market tops $10.6B, according to SmarTech Analysis, which predicts it will reach $50.8B by 2030.
Uniformity Labs Offers Low Porosity Stainless Steel Powders
April 11, 2022
Uniformity Labs' low porosity 316L and 17-4 PH powders exhibit tap densities of up to 85%, according to the company.
Properly Dry 3D Printer Filaments
April 8, 2022
The JengaLabs Active Dryer offers preset drying profiles and ease of use.
Printer Could Provide up to 70 Percent Speed Improvement
April 8, 2022
Anker Innovations unveils new AnkerMake M5 3D printer
Markforged Acquires Teton Simulation Software
April 7, 2022
SmartSlice software improves 3D printed part quality.
Meet Your New Design Consultant: Generative Design
April 5, 2022
Designers discover and learn generative design on YouTube; find AM to be complementary.
Latest News
PTC Releases Creo v11, Updates Creo+
This launch enables engineers to enjoy enhancements for electrification, composites, model-based definition, simulation-driven design and manufacturing, the company says.
CADENAS Announces Membership in Industrial Twin Association
The IDTA is the first point of contact for all aspects of the standardized digital twin.
Hexagon Announces Leadership Appointments
Hexagon Asset Lifecycle Intelligence Division appoints senior leadership.
Ingersoll Rand Leads $19M Financing Round for Inkbit
Inkbit will use funding to advance to multifunctional additive manufacturing.
CAD Users Embrace Hybrid Modeling
Subdivision modeling gaining ground in production phase surface modeling.
ESTECO International Users’ Meeting Announces Agenda
The early June meeting, to take place in Italy, includes keynotes from Toyota, Eaton and more.
All posts
New & Noteworthy
New & Noteworthy: Safe, Cost-Effective Metal 3D Printing - Anywhere
Desktop Metal’s Studio System offers turnkey metal printing for prototypes and...
New & Noteworthy: Direct Neutronics Analysis on CAD
Coreform Cubit 2023.11 workflows enable neutronics directly on CAD for next-generation nuclear energy...
New & Noteworthy: Agile Engineering Collaboration
Authentise Threads is a new software tool for distributed communications and project...
New & Noteworthy Product Introduction: Enterprise VR Headset
Lenovo ThinkReality VRX has an immersive display works with virtual, augmented and...