Top Story
HP Targets Production-Scale Metal 3D Printing
September 19, 2022
Metal Jet S100 leverages HP’s binder jetting and printhead advantages to economically print metal parts at scale.
B-jetting Unveils Two 3D Binder Jet Platforms
March 3, 2023
Both printers provide a turnkey, binder-jet system.
HP Targets Production-Scale Metal 3D Printing
September 19, 2022
Metal Jet S100 leverages HP’s binder jetting and printhead advantages to economically print metal parts at scale.
Desktop Metal Debuts S-Max Flex Robotic System
April 19, 2022
New system joins Desktop Metal’s ExOne S-Max line of industrial sand binder jetting solution.
Digital Metal and Etteplan Enter Design Partnership in Additive Manufacturing
October 5, 2021
The partnership aims to offer design optimization solutions for Digital Metal binder jetting processes.
Partnership Brings Large-Scale 3D Printing To Off-Shore Wind Turbines
September 28, 2021
Trio to optimize production of key casting components for GE’s Haliade-X off-shore turbine near wind project site.
3D Printed Tooling Sets a Place for Eco-Friendly Packaging
September 22, 2021
Binder jetting technology enables unique tooling to be manufactured quickly at a fraction of the cost.
Desktop Metal Launches 316L Stainless Steel
August 24, 2021
Shop System binder jetting enables cost-effective batch production of 316L stainless steel parts via additive manufacturing.
Desktop Metal and Uniformity Labs Reach Breakthrough in Aluminum Sintering
March 12, 2021
Fully dense, sinterable 6061 aluminum with better-than-wrought strength to be available exclusively for the Desktop Metal Production System, companies report.
Editor’s Pick: Calculating the cost of binder jet 3D metal printing
January 27, 2021
ExOne Production Metal Cost Calculator offers a per-part estimate for binder jet 3D printing a precision metal part so users can quickly compare the technology to other forms of traditional and additive manufacturing.
ExOne Launches Online Calculator for Manufacturers
January 14, 2021
New tool provides per-part estimate for binder jetting on any metal ExOne Pro series 3D printer.
Digital Metal Launches Tool Steel Alloy for Binder Jetting
December 8, 2020
DM D2 is a tool steel alloy that provides an effective combination of abrasive wear resistance and toughness, according to Digital Metal.
ExOne Awarded Contract to Develop High-Strength Steel for US Air Force
October 26, 2020
Parts additively manufactured with AF-9628 are about 20% stronger than conventional AM alloys.
Desktop Metal Launches Metal Binder Jetting System Made for Machine Shops
November 22, 2019
Shop System enables batch production of high-quality metal parts on the shop floor starting at $150,000.
ExOne to Collaborate with Global Tungsten & Powders to Advance Tungsten Metal 3D Printing
October 30, 2019
Development collaboration to focus on cemented carbide, used in cutting tools and wear-resistant parts, and tungsten-copper, used in high-voltage electrical applications.
HP Advances Metal 3D Printing for Mass Production
September 17, 2018
The HP Metal Jet—a platform that the company says addresses longstanding limitations of metal 3D printing and positions the technology as a cost-effective alternative for low-cost, mass production—is revealed at IMTS.
Latest News
Matching Workstation to Workload
Finding just the right fit can be tricky but doable.
Meltio M600 Wire-Laser System Now Available
The combination of wire deposition, blue lasers, a large inert workspace, and smart sensors allow the new Meltio M600 to...
General Atomics Aeronautical Systems Adopts Siemens Xcelerator
GA-ASI is counting on ability to achieve marked productivity gains in the design of composite aerostructures by adding Siemens Xcelerator...
Embraer Picks Dassault Systèmes’ Simulation Technology
Company chooses this technology to support quieter eVTOL aircraft development for Eve Air Mobility, according to Dassault.
GE Aerospace Invests Sizably in Ohio
In addition to the investments, GE Aerospace is hiring more than 1,000 employees for open external positions at its U.S....
Ansys, Snack Giant Mars Partner for Digital Transformation
The multiphysics simulation technology minimizes the need for extensive physical testing during the packaging development process.
All posts
New & Noteworthy
New & Noteworthy: Safe, Cost-Effective Metal 3D Printing - Anywhere
Desktop Metal’s Studio System offers turnkey metal printing for prototypes and...
New & Noteworthy: Direct Neutronics Analysis on CAD
Coreform Cubit 2023.11 workflows enable neutronics directly on CAD for next-generation nuclear energy...
New & Noteworthy: Agile Engineering Collaboration
Authentise Threads is a new software tool for distributed communications and project...
New & Noteworthy Product Introduction: Enterprise VR Headset
Lenovo ThinkReality VRX has an immersive display works with virtual, augmented and...