Helping design and engineering professionals discover, evaluate and specify technologies and processes that shorten the design cycle and enable success.
February 13, 2026 · The initial evaluation by NASA will assess characteristics of Titomic-produced parts for potential use in aerospace applications.
January 22, 2026 · Under the agreement, Titomic will collaborate with UNT’s Center for Agile and Adaptive Additive Manufacturing (CAAAM) on the integration and use of Titomic’s TKF systems at the University.
February 5, 2025 · As the partnership progresses, collaboration will extend into the development and application of other materials and technologies.
October 1, 2018 · From new cold spray deposition methods to innovations in extrusion processes, advances in metal additive manufacturing address long-standing limitations related to cost, safety and time to print.
Cut Retrieval-Augmented Generation (RAG) Hallucinations by 50%
Most teams hit the same wall with enterprise AI: LLMs that hallucinate, pipelines that don’t scale, and infrastructure that’s harder to design than the models themselves.
April 2026 Special Focus Issue: Generative Design
In this Special Focus Issue, Digital Engineering takes a look at how generative design solutions can be used across different types of design problems and with a variety of manufacturing approaches to accelerate design space exploration, and…
About Us · Contact Us · Editorial Team · Advertising · Privacy Policy · Subscriber Services · © 2026 Digital Engineering 24/7 · Peerless Media