Digital Engineering 24/7

Helping design and engineering professionals discover, evaluate and specify technologies and processes that shorten the design cycle and enable success.

Autonomous Cars Hit the Road at CES

By Brian Albright  

December 4, 2001

Among the many innovations featured at CES, there were a number of autonomous vehicle announcements. Toyota's Lexus division unveiled its advanced active safety research vehicle, which includes a number of features that would enable a self-driving car—even though that isn't Toyota's stated goal.

Among the features in the vehicle: a 360-degree LIDAR laser to scan for other objects; high-definition color cameras that detect approaching vehicles and traffic light changes; radar systems; a distance measurement indicator to measure travel distance and speed; an inertial measurements unit; and GPS antennas.

Combined, these systems can help drivers avoid crashes, and minimize severity when they do have an accident. Toyota has also launched an Intelligent Transportation System (ITS) proving ground to test vehicle-to-vehicle and vehicle-to-roadside communications systems.

Audi, meanwhile, exhibited a self-driving car at CES. The Audi A7 sedan performed in two demos: handling a traffic jam, and negotiating a parking garage. Audi has developed its own version of LIDAR that can be mounted in the vehicle's grille. (Currently, Toyota and Google both use rather goofy looking devices mounted on the roof of the vehicle.)

In Audi's demonstration, the company used a smartphone app to signal the car to drive itself from the garage to the front of the Mandarin Oriental Hotel in Las Vegas, and then parallel park. However, the Audi system requires a laser grid map of the structure transmitted via sensors and a Wi-Fi connection for this tricky navigation to work.

You can watch the Audi in action below:

Source: New York Times

 
 

From our Sponsors

Meltio Takes Metal Additive to the Next Level
Meltio's DED technology enables industries to tailor and customize their solutions to create & repair metal parts.
Easing the Transition from ETO to CTO with Configuration Lifecycle Management
Manufacturers are discovering that the Configure-to-Order (CTO) model provides significant benefits when it comes to customization.
Siemens + Altair = The Next Chapter in Design and Simulation
With its acquisition of Altair, Siemens creates a unified simulation portfolio combining generative design with high-performance computing and AI workflows.