Geometric to Exhibit at Siemens PLM Connection 2011

Will show PLM solutions, including Integrated Process Planning.

Will show PLM solutions, including Integrated Process Planning.

By DE Editors

Geometric Limited will exhibit its next generation PLM solutions, including Integrated Process Planning (IPP) and global services for Teamcenter adoption at the Siemens PLM Connection 2011. The annual user conference takes place in Las Vegas from May 2-5.

During the event, Geometric will be presenting its Integrated Process Planning (IPP) solution on May 4 at 2:30 p.m. in Amazon PQ Hall and its solution for JT based workflows during the Partner Round Table on May 3 at 1 p.m. in the Palma G room.

“Responding to customer interest over the past year, we will be presenting our two key innovations at the event; our Integrated Process Planning (IPP) solution and our solution for enabling rich JT based workflows,” says Nitin Tappe, vice president and Global Operation head at Geometric. “The IPP solution leverages the PLM application backbone and Geometric’s own technologies to enable more efficient cross functional processes for manufacturing planning by enabling companies to take informed decision for manufacturing process selection.”

Geometric’s Integrated Process Planning (IPP) solution aims at addressing the manufacturing engineering need of using design content to select the manufacturing processes and its associated resources. It helps in addressing the gaps that exist in linking the design objectives (requirements) to the manufacturing processes.

For more information, visit Geometric.

Sources: Press materials received from the company and additional information gleaned from the company’s website.

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].

Follow DE
#3604