Helping design and engineering professionals discover, evaluate and specify technologies and processes that shorten the design cycle and enable success.
Found in Content
John Newman · December 3, 2015 · The strength of additive manufacturing (AM) lies in its flexibility. The technology is employed for a wide variety of end-use products, including everything from rocket engine parts to prosthetic limbs. That wasn’t always the case. Go back about six years and AM was mainly seen as a tool…
Found in Content
John Newman · November 29, 2012 · …the continuing developments in additive manufacturing (AM) is use of color. With a few exceptions, very few printers offer anything like multi-color prints during the same run. If the project you are working on requires full color, the number of knives you have available becomes very small.Enter Mcor…
Found in Content
Brian Albright · May 18, 2015 · …for the initial devices. Syqe planned to use traditional manufacturing methods once full-scale production began, but indicated that some components would still be produced using the printers.” frameborder=“0” allowfullscreen=“yes”>Source: The Times of Israel
Found in Content
John Newman · October 20, 2014 · Additive manufacturing (AM) is hard at work every day helping reduce parts weight for aerospace, building new options for medical treatment, and a million other uses that will probably go unseen. Some designs manage to leverage the power of AM in practical ways that might also be aesthetically…
Found in Content
DE Editors · March 18, 2022 · Xerox Elem Additive Solutions has installed a Xerox ElemX 3D metal printer at the Department of Energy’s Manufacturing Demonstration Facility (MDF) at Oak Ridge National Laboratory (ORNL) to advance metal additive manufacturing (AM) technologies. The ElemX leverages liquid Metal AM that uses aluminum wire and is easily deployed,…
Found in Content
Brian Albright · January 5, 2022 · Product designers face high expectations today like never before. Consumers demand personalization, quality, and availability. Online marketplaces that cater to these demands have only heightened this trend. Designers have to hit the mark every time, with success or failure immediately amplified through social media. Against this backdrop, the…
Found in Download
George Kokoris · November 1, 2018 · …it’s no surprise the additive technology has been described as the Third Industrial Revolution. The right 3D technology depends on the materials, aesthetics, mechanical properties and overall performance your product requires. You may have already ruled out 3D printing technologies, such as Selective Laser Sintering (SLS), Direct Metal…
Found in Content
DE Editors · November 26, 2018 · …which will broaden the manufacturing possibilities of both Sinterit Lisa printers,” says Konrad Glowacki, one of the co-founders of Sinterit. “We are very open to those inquiries because we are aware that the capabilities of SLS rapid prototyping have not been fully used yet.” With enhanced elasticity, the…
Found in Content
John Newman · August 14, 2015 · …of the success of additive manufacturing (AM) can be explained by the flexibility of the technology. It can be (and is) used by nearly every industry. The other reason AM continues to grow and thrive is improved material options.Optical fiber is one such new material, and now WACKER…
Found in Content
DE Editors · December 11, 2024 · …Endeavor 3D, a high-volume additive manufacturing company based in metro Atlanta. This collaboration will enhance both companies’ abilities to provide solutions for design and manufacturing challenges in the southeast United States. As a provider of 3D design solutions, CADmore says it has played a role in the digital…
Found in Content
John Newman · March 24, 2016 · …in the “democratization of manufacturing” would restrict material availability to its customers through the use of proprietary materials. While touted as a means to ensure quality, many 3D printer users can’t help but wonder whether the only thing separating the roll of filament used in one 3D printer…
Found in Content
John Newman · March 25, 2014 · …rough product is a manufacturing process that can be traced back thousands of years. When more complex designs became required, the process was altered slightly by building a mold using a wax model that could be burned out prior to the metal being poured into the mold. This…
Found in Content
DE Editors · December 8, 2020 · …of MES software for additive manufacturing, is collaborating with HP to enable data streaming and connectivity for HP Jet Fusion systems through AMFG’s Manufacturing Execution System 〈MES〉 software. The collaboration aims to solve a barrier to unlocking the full potential of additive manufacturing: The lack of connectivity across…
Found in Content
DE Editors · March 23, 2019 · Ranked as the top additive manufacturing (AM) platform vendor, Stratasys scored highest in the overall category of implementation and topped four of the 12 ranking criteria, according to ABI Research. Stratasys was closely followed by 3D Systems, Desktop Metal and GE Additive in overall rankings. Newcomer Desktop Metal…
Found in Content
DE Editors · February 10, 2025 · …that its Stratasys Direct manufacturing facility in Tuscon, AZ, has achieved ISO 13485 certification, a globally recognized standard for quality management systems in medical device manufacturing. Stratasys plans to extend this certification to its other Stratasys Direct manufacturing facilities in Texas and Minnesota. By achieving ISO 13485 certification,…
Found in Content
DE Editors · February 13, 2026 · …vested in cold spray additive manufacturing using their Titomic Kinetic Fusion technology, reports it has signed a Space Act Agreement with NASA to conduct testing and evaluation of components produced using Titomic’s cold spray technology. This opportunity enables Titomic to demonstrate the capabilities of its advanced manufacturing processes…
Found in Content
DE Editors · November 22, 2024 · …RenAM 500 series of additive manufacturing (AM) machines. The qualification of Continuum's powders for the RenAM 500 series demonstrates their compatibility and performance when used in Renishaw's additive manufacturing systems. This synergy helps pave the way for enhanced circularity in additive manufacturing, providing a reclaimed material source to…
Found in Content
DE Editors · March 6, 2024 · Introducing the Formlabs Texture Engine, currently available in beta. This free, lightweight, web-based app is designed to quickly apply textures to 3D models, ready to be 3D printed. Many plastic parts incorporate surface textures and patterns to enhance the look and feel or to optimize the part for…
Found in Content
DE Editors · October 25, 2022 · …used to create digital manufacturing hardware and software, has set up a collaboration with SLM Solutions for support of the SLM file format within its Application Development Kit (ADK). Through Dyndrite, SLM customers can design parameters based on unique aspects. Dyndrite delivers an ADK that provides GPU-powered 3D…
Found in Content
Brian Albright · February 16, 2015 · …ESA statement. “That represents a revolution in design and manufacturing.“You can see more images of the printer from a recent presentation here.Source: Space.com
May 2026 Special Focus: Artificial Intelligence in Design and Simulation
In this Special Focus Issue, learn about the latest developments in the integration of artificial intelligence into engineering workflows.
Cut Retrieval-Augmented Generation (RAG) Hallucinations by 50%
Most teams hit the same wall with enterprise AI: LLMs that hallucinate, pipelines that don’t scale, and infrastructure that’s harder to design than the models themselves.
About Us · Contact Us · Editorial Team · Advertising · Privacy Policy · Subscriber Services · © 2026 Digital Engineering 24/7 · Peerless Media