Helping design and engineering professionals discover, evaluate and specify technologies and processes that shorten the design cycle and enable success.
July 13, 2022 · Nano Dimension and Hensoldt launches online FrAMEwork platform to create community and collaboration to advance 3D printed electronics.
January 24, 2022 · The AME NanoLab Network will open access to customers and researchers to experience the AME workflow in two steps, from design to final prototype.
January 6, 2022 · Nano Dimension also implements its vision for specialized 3D printing and additive manufacturing.
December 15, 2021 · Propelled by materials advances, innovative techniques and performance improvements, additive manufacturing (AM) has come a long way since the days of experimentation for prototyping. As products gain complexity and shrink in size, AM is advancing to accommodate production of micron-level parts.
November 8, 2021 · Acquisition lays groundwork for microchips placement as part of additively manufactured electronics solution.
October 5, 2021 · Fabrica 2.0 Micro Manufacturing Technology was formally confirmed as meeting the high standards of this government agency
September 3, 2021 · Micro Additive Manufacturing System to be available at RAPID + TCT 2021 show.
September 2, 2021 · One of the picks will be chosen as DE’s Editor’s Pick of the Week.
August 13, 2021 · Nano Dimension expands its reach beyond additive manufacturing electronics.
April 27, 2021 · Nano Dimension will pay the shareholders of NanoFabrica a total ranging between $54.9 million and $59.4 million.
April 20, 2021 · Artificial intelligence will drive its 3D-artificial intelligence/machine learning distributed digital fabrication applications.
February 12, 2021 · Company teaming up with other industry suppliers to educate professionals on additively manufactured electronics.
February 25, 2020 · Nano Dimension will be able to better serve its customers through its new training and demo center.
September 19, 2019 · One of the picks will be chosen as DE’s Editor’s Pick of the Week.
September 16, 2019 · Capacitors 3D printed on the DragonFly system eliminate the need for assembly.
August 5, 2019 · One of the picks will be chosen as DE’s Editor’s Pick of the Week.
July 26, 2019 · HENSOLDT tests the DragonFly LDM additive manufacturing technology and discusses the results.
July 25, 2019 · One of the picks will be chosen as DE’s Editor’s Pick of the Week.
July 15, 2019 · IIT is a research institution in Italy specializing in promoting technological development and higher education in science and technology.
May 31, 2019 · Nano Dimension and Harris Corporation receive grant approval to create hardware to fly on the International Space Station.
Cut Retrieval-Augmented Generation (RAG) Hallucinations by 50%
Most teams hit the same wall with enterprise AI: LLMs that hallucinate, pipelines that don’t scale, and infrastructure that’s harder to design than the models themselves.
April 2026 Special Focus Issue: Generative Design
In this Special Focus Issue, Digital Engineering takes a look at how generative design solutions can be used across different types of design problems and with a variety of manufacturing approaches to accelerate design space exploration, and…
About Us · Contact Us · Editorial Team · Advertising · Privacy Policy · Subscriber Services · © 2026 Digital Engineering 24/7 · Peerless Media