Digital Engineering 24/7

Helping design and engineering professionals discover, evaluate and specify technologies and processes that shorten the design cycle and enable success.

Alert!

Digital Engineering ceased publication on July 1, 2026. This website remains available as an archive of engineering content.

For inquiries or information, please email [email protected].

Honeywell Introduces TruStability NSC Series Pressure Sensors

Uncompensated/unamplified board-mount sensors promise self-calibration plus stability, accuracy and repeatability.

By DE Editors  

July 18, 2011

By DE Editors

Honeywellhas introduced the Honeywell TruStability NCS Series, uncompensated/unamplified board-mount pressure sensors.

The TruStability NSC Series offers a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range. Because they are uncompensated and unamplified, they offer infinite resolution on the pressure signal. The frequency response is limited only by the end user’s system. Ranging from 1 psi to 150 psi (60 mbar to 10 bar), these sensors will operate as specified from -40 °C to 85 °C ]-40 °F to 185 °F], according to the company. They are available in absolute, differential, and gage types.

Honeywell says the NSC Series’ stability helps to minimize system calibration needs, maximizes system performance, and supports system uptime by eliminating the need to service or replace the sensor during its application life.

The NSC Series also offers a ±0.25 %FSS BFSL (Best Fit Straight Line), which reduces software required to correct system inaccuracies, minimizing system design time, supporting system accuracy and warranty requirements, and helping to optimize system uptime.

The modular, flexible design has many package styles, pressure ports, and options that simplify integration into the device manufacturer’s application. These products are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases, as well as with non-corrosive, non-ionic liquids.

The 10 mm x 10 mm ]0.39 in x 0.39 in] package occupies less area on the PCB and typically allows for easy placement on crowded PCBs or in small devices, the company says.

Honeywell TruStability NSC Series may be used to provide both monitoring and control of pneumatic flow and system pressure for precise and efficient performance in a variety of potential industrial and medical applications.

For more information, visit Honeywell.

Sources: Press materials received from the company and additional information gleaned from the company's website.

 
 

From our Sponsors

Meltio Takes Metal Additive to the Next Level
Meltio's DED technology enables industries to tailor and customize their solutions to create & repair metal parts.
Easing the Transition from ETO to CTO with Configuration Lifecycle Management
Manufacturers are discovering that the Configure-to-Order (CTO) model provides significant benefits when it comes to customization.
Siemens + Altair = The Next Chapter in Design and Simulation
With its acquisition of Altair, Siemens creates a unified simulation portfolio combining generative design with high-performance computing and AI workflows.