Jabil Shares Findings of 3D Printing Tech Trends Survey
Nearly three-quarters of respondents printed at least 10,000 parts, while more than a third printed up to 100,000 parts last year.
July 28, 2023
Jabil Inc. reports the findings of its latest global survey of additive manufacturing decision makers. Since 2017, Jabil has conducted this biennial survey to trace the trajectory of additive manufacturing while identifying opportunities and challenges facing decision makers. The latest survey results reveal continued adoption of 3D printing in production environments despite roadblocks with cost and availability of additive materials.
“The results of our latest manufacturing survey confirm our experiences in helping customers leverage the speed and agility of 3D printing to transform different manufacturing steps—from prototyping to production,” says Luke Rodgers, Jabil’s senior director of R&D for additive manufacturing. “In particular, this survey underscores how increased adoption of additive manufacturing is driving demand for differentiated additive materials with improved physical properties to deliver greater functionality, increased sustainability and economies of scale.”
Jabil commissioned SIS International Research to conduct the 3D Printing Technology Trends Survey with participation from 200 additive manufacturing stakeholders worldwide. Questions were designed to offer understanding of decisions concerning 3D printing and additive manufacturing materials based on current opportunities, challenges and industry developments. More than half of the top executives surveyed regard additive manufacturing as a strategic opportunity to enhance their organizations, while 40% consider 3D printing as a viable alternative to designing and/or producing products.
A majority of the participants (97%) currently are using 3D printing to produce functional or end-use parts. Nearly three-quarters of participants produced at least 10,000 3D-printed parts over the past year, and more than a third printed up to 100,000 parts. Overall, participants anticipate an uptick in the use of 3D printing for production parts or goods in the next 3-5 years, despite being less bullish about overall 3D printing industry growth than previous participants of additive manufacturing surveys.
Other key findings include:
- Top three use cases for 3D printing are prototyping (97%), research and development (75%), and production parts (59%).
- 3D printing use for bridge production (moving from prototyping to initial production) grew from 23% in 2017 to 59% in 2023, while 3D printing jigs, fixtures, and tooling nearly doubled from 2017 (30%) to 2023 (58%).
- Prototyping is recognized for delivering the most significant impact to product lifecycles by 95% of the participants, followed by product designs (52%) and small-scale production (27%).
Additive manufacturing benefits have remained consistent since 2019, with ability to deliver parts faster, decrease production costs, respond to issues on production lines, and enable production of personalized and customized goods.
Challenges in Additive Materials
Over the years, Jabil’s survey participants increasingly embraced myriad advantages of additive manufacturing, yet issues concerning the cost and availability of materials have remained consistent. Materials were identified as the primary financial or cost burden to adopting 3D printing by 79% of participants, up from 18% just 2 years prior. Nine in 10 of those surveyed assert that the biggest challenge is the unavailability of desired materials.
Two-thirds of this year’s participants say they use custom-engineered materials as part of their overall additive manufacturing strategies. This finding may be in response to ongoing materials shortages, along with increased demands to produce parts with performance characteristics. Increased use of engineered materials with value-added attributes also reflects continued innovations in additive materials to improve the physical properties of end-use parts for greater use at lower costs, and faster delivery and less waste.
Overall, use of plastics/polymers has been pervasive among survey respondents since 2019. The use of metals, however, has greatly increased, from 39% in 2019 to 92% in this year’s survey. More than 96% expressed a preference for using metal materials under the right conditions, up from 63% in the 2019 survey.
From Ideation to Industrialization
Jabil continues to expand its global additive manufacturing solutions, encompassing continuous advancements in additive materials and platforms to complement its global manufacturing capabilities. Among its additive materials innovations are Jabil PLA 3110P, a sustainable PLA powder based on NatureWorks’ Ingeo biopolymer; and Jabil PK 5000, an engineered material that delivers improved chemical resistance and resilience in comparison to general-purpose nylon materials.
Sources: Press materials received from the company and additional information gleaned from the company’s website.
Subscribe to our FREE magazine,
FREE email newsletters or both!About the Author
![DE Editors's avatar](https://www.digitalengineering247.com/images/avatars/avatar_16.png)
DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].
![](http://scg-de.s3.amazonaws.com/images/made/images/article/Ansys_Access_350_170_bor1_b9b3be_s_c1.png)
![](http://scg-de.s3.amazonaws.com/images/made/images/article/DesktopMetal_Studio_5_350_170_bor1_b9b3be_s_c1.png)
![](http://scg-de.s3.amazonaws.com/images/made/images/article/Coreform_Nuclear_Product_350_170_bor1_b9b3be_s_c1.png)
![](http://scg-de.s3.amazonaws.com/images/made/images/article/Authentise-image-1_600_350_170_bor1_b9b3be_s_c1.jpg)