Digital Engineering 24/7

Helping design and engineering professionals discover, evaluate and specify technologies and processes that shorten the design cycle and enable success.

Is Hyperloop a Hyped Dream or Practical Design? ANSYS Weighs In

Latest Design News

Latest Design Resources

By Kenneth Wong  

October 7, 2013

If Hyperloop becomes a reality, I can go from my home office in San Francisco to Los Angeles in roughly half hour. (Lunch in Hollywood, anyone?)

The idea for a hyper-speed train (roughly 600-750 MPH) first began as a crowd-sourced project on JumpStartFund. The concept is backed by, among others, Elon Musk, CEO of TESLA Motors.

"The Hyperloop (or something similar) is, in my opinion, the right solution for the specific case of high traffic city pairs that are less than about 1500 km or 900 miles apart," he wrote in TESLA's blog on August 12, 2013.

Another famous name attached to the project is Marco Villa, former director of SpaceX. He joined the project soon after the crowd-sourced design became public. Today, the project is driven by a foundation dedicated to it.

Is it possible to make Hyperloop a mass-commute reality? Dr. Sandeep Sovani, ANSYS' director of global automotive strategy, believes it is possible, with some modification. His confidence is based on insights from a digital simulation of the initial open-source design.

Blogging about the findings, Sovani wrote, "It sounds like something out of Star Trek or Buck Rogers, but the notion of a super-fast (think speed of sound or faster) ground-based transportation system isn’t science fiction ... The Hyperloop will indeed work – with some tweaks."

In my conversation with him, Sovani identified two critical engineering issues to resolve: "The first is the aerodynamic of the capsule, and the second is how to suspend the capsule inside the tube."

Based on the digital simulation he's done, Sovani believed the capsule should be more asymmetrical. Beside insights from the simulation, Sovani also thinks it's a good idea to "put some air bearings, wheels, or some type of suspension on the upper side of the capsule as well. That's to prevent it from bumping up against the tube due to instability."

ANSYS plans to share its findings from the simulation as open-source data, in alignment with the project's character. For my complete interview with Sovani, listen to the podcast below.

On a personal note, I happen to have quite a few former classmates and good friends in LA I'd like to see on a more regular basis, if I can do so without dealing with the unpredictability, claustrophobia, and long delays associated with air travel. So I have a good reason to keep a close eye on Hyperloop's development.

I'd like to have breakfast in San Francisco and lunch in LA. Is that too much to ask for?

 

 

Latest in Ansys

About Kenneth Wong

Kenneth Wong

Kenneth Wong is Digital Engineering's resident blogger and senior editor. Email him at [email protected] or share your thoughts or suggestions at digitaleng.news/facebook.

Follow DE
on Facebook
on Linkedin

Related Topics

Design   ​CAD   Simulate   Resources   Virtual Desktop   Ansys   Hyperloop   All topics
 

Subscribe

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.

Subscribe today

 
 

From our Sponsors

Meltio Takes Metal Additive to the Next Level
Meltio's DED technology enables industries to tailor and customize their solutions to create & repair metal parts.
Easing the Transition from ETO to CTO with Configuration Lifecycle Management
Manufacturers are discovering that the Configure-to-Order (CTO) model provides significant benefits when it comes to customization.
Siemens + Altair = The Next Chapter in Design and Simulation
With its acquisition of Altair, Siemens creates a unified simulation portfolio combining generative design with high-performance computing and AI workflows.