DE · Topics · Test

Pico Technology Introduces PicoScope 9404 SXRTO Real-Time Oscilloscope

The 9404 features four 5 GHz 12-bit channels, each supported by real-time sampling to 500 MS/s per channel and up to 1 TS/s (1 ps) equivalent-time sampling. 

The 9404 features four 5 GHz 12-bit channels, each supported by real-time sampling to 500 MS/s per channel and up to 1 TS/s (1 ps) equivalent-time sampling. 

Pico Technology has introduced the PicoScope 9404 SXRTO (Sampler eXtended Real-Time Oscilloscope). The 9404 features four 5 GHz 12-bit channels, each supported by real-time sampling to 500 MS/s per channel and up to 1 TS/s (1 ps) equivalent-time sampling. Both the voltage and timing resolution specifications are characteristics of the broadband oscilloscopes. 

The wide-band inputs, and fine timing and voltage resolutions, display and accurately measure transitions as fast as 70 ps, clock performance and eye diagram analysis of gigabit signals. Less than 2 ps RMS trigger jitter and 5-GHz internal trigger supports margin analysis and characterization of high-speed serial data systems. While real-time broadband sampling can support simultaneous display of baseband modulation, carrier envelope and envelope track control signals around amplify, route and transmit paths; including major wireless communication frequency bands such as 900MHz and 2.4GHz.

Pico’s SXRTO technology transitions to single event waveform capture at sampling rates at and below 500 MS/s into capture memory of 250,000 samples (single channel); particularly valuable for the capture of slower system signals and modulation envelopes for example.

This USB controlled instrument is supplied with PicoSample 4 software. The touch compatible GUI supports setup of the instrument and presents waveforms, measurements and statistics on the user preferred size and format of display.  This includes full support for Hi Resolution monitors and projection, for example 4k.  Up to four independent zoomed trace views can be used to examine the waveform details.

A range of automated and user-configurable signal integrity measurements, mathematics, statistical views and limits test facilities are included for validation and trending of pulse and timing performance, jitter, RZ & NRZ eye diagrams. Industry-standard communications mask tests such as PCIe, GB Ethernet and Serial ATA are included as standard. 

While most users will use the PicoSample 4 software in their workplace, for OEM and custom applications the PicoScope 9404 can operate under ActiveX remote control. Programming examples are provided in Visual Basic (VB.NET), MATLAB and LabVIEW, but any programming language or standard that supports the Windows COM interface standard, including JavaScript and C, can be used. 

PicoConnect 900 Series gigabit and microwave passive test probes are recommended for use with the 9404, offering a range of bandwidths, coupling types and division ratios for diverse applications.  The PicoScope 9404 has an active SMA interface to support future configurations and accessories on this new product architecture. 

More Info

Pico Technology

Sources: Press materials received from the company and additional information gleaned from the company’s website.

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].

Follow DE
#22337