
Top Story
Taking a Page from Nature
December 4, 2022
GE Additive and Shell leveraged metal AM to rethink a large, complex conical part for an oxygen hydrogen micromixer.
GE Additive Names Alexander Schmitz as CEO
December 20, 2022
Experienced executive joins mid-January 2023, as GE Additive enters next phase of growth and transformation, company says.
Boom Supersonic Debuts Symphony Engine for Overture
December 20, 2022
Boom-led collaboration brings together ompanies across design, manufacturing and maintenance.

Taking a Page from Nature
December 4, 2022
GE Additive and Shell leveraged metal AM to rethink a large, complex conical part for an oxygen hydrogen micromixer.

Larger, Lighter Metal AM Parts Take Flight
December 1, 2022
European consortium unveils one-meter-in-diameter part manufactured using Direct Metal Laser Melting (DMLM) technologies as part of a push towards lower emissions flight.

Shell and GE Additive Metal 3D Print Oxygen Hydrogen Micromixer
November 30, 2022
Shell operates a 3D printing facility at Energy Transition Campus Amsterdam in proximity to its scientists and partner companies to leverage additive manufacturing to prototype.

GE Aerospace TURNS Up Lighter, Larger AM Parts
October 25, 2022
Consortium unveils Advanced Additive Integrated Turbine Centre Frame (TCF) casing which consolidates 150 parts into one.

Purdue Launches Hypersonics Materials Research
February 11, 2022
New center will develop high-temperature materials along with the corresponding manufacturing processes.

GE Aviation Invests in Five M Line Systems
February 10, 2022
During 2022 GE Additive to deliver systems to GE Aviation’s Additive Technology Center in West Chester, Ohio, and to Avio Aero in Turin, Italy.

AP&C Inks Agreement With Airbus to Provide Titanium Powders
December 7, 2021
The new multiyear agreement to provide Ti-6AI-4V powders deepens AP&C’s working relationship with Airbus.

GE Splits in Three
November 10, 2021
GE Additive will be part of new aviation-focused entity, while GE healthcare and power divisions are spun off.

EROFIO Group 3D Prints First Part on GE Additive Concept Laser M Line
June 8, 2021
GE Additive Concept Laser M Line scheduled to be commercially available later in 2021.

Subtractive and Additive Under the Same Roof
April 15, 2021
DfAM triggers an evolution of parametric CAD with algorithms, generative design and 3D printing microservices.

GA-ASI Completes Its First Test Flight With Metal 3D-printed Part
May 26, 2020
General Atomics Aeronautical Systems marks a technology milestone as its first metal additively manufactured part takes to the skies on a SkyGuardianRemotely Piloted Aircraft test flight.
Editor’s Picks: Nov. 21-27, 2019
December 5, 2019
One of the picks will be chosen as DE’s Editor’s Pick of the Week.

GE Additive Unveils Arcam EBM Spectra L Printer at Formnext
November 20, 2019
Company also announces new Concept Laser M2 Series 5, powder recovery station, support for new materials.
Latest News
Love the Problem
While new solutions are emerging all the time, many of the problems engineers face can be dishearteningly consistent.

Preparing Youth for Tech of Tomorrow
Student Competition Profile: The FIRST Community and Team Robotics
SimScale Goes Carbon Neutral
SimScale has achieved the corporate carbon neutral label.
Editor’s Picks: March 23-29, 2023
One of the picks will be chosen as DE’s Editor’s Pick of the Week.
All posts
Editors’ Picks

Editor’s Pick: Joule Heating Simulation
SimScale says the new features allow engineers to explicitly define key Joule...

Editor’s Pick: Simulation for additive manufacturing processes
Desktop Metal Live Suite extends the company’s Live Sinter simulation software.

Editor’s Pick: Faster Setup for EV Battery Simulation
Siemens Simcenter STAR-CCM+ 2302 streamlines workflow setup, processes new flow possibilities and much...

Editor’s Pick: Analyze models for 3D printing suitability
Protolabs Instant Manufacturability Analysis online service simplifies parts design process for 3D...